1.8W Wireless Solar Powered Motion Sensor Light with Lithium Battery Built-in

Products Display

How to install this solar LED light ?

 

1. Need open solar power system firstly.
The battery which was builted-in product was locked, please use the key that we provided to insert the power on/off.

2. Fix the solar light on wall or column.
Please use the expansion plug that we provided and screw to fix product on the wall or column. The optimum installation height is 2~4m.Note: Please punch expansion plug before installation, then use screw to fix product.

3. Sunlight to charge the solar light.
Install the product on the position which can be radiated directly by sunlight, it is better to orient sourth direction,and ensure solar panel don’t have any shadow or obstruction to cover sunlight, Usually the product need be radiated more than 3 hours at first utilization, the product can be charged full under standard sunlight to radiate 7 hours.
Detail is as below direction

Function introduction

1.  Body Induction Sensor and Light-operated Function.
The LED light will be full lighting for 40 seconds when someone pass by under no sunlight and no any other lighting condition, stop to light after the body leave, it will be lighting again when another someone pass by.

2. Voice Control and Light-operated Function.
The LED light will be full lighting when having voice under no sunlight and no any other lighting condition, it will not light if don’t have voice and nobody pass by.

3. Body Induction Sensor, Light-operated and Half Lighting Function.
The LED light will be half lighting in night under no any other lighting, it will be full lighting when someone pass by, and being half lighting after the one leaving.

4. Voice Control, Light-operated and Half Lighting Function.
The LED light will be half lighting in night under no any other lighting, it will be full lighting more than 30 seconds when having voice, then to be half lighting after 30 seconds no voice.

5. Pure Light-operated Function.
The LED light will be full lighting when no having any other lighting, it will be no lighting when having other lighting condition, the battery of pure light-operated is 1200mAh.

Application
This solar light is widely used for courtyard,street, roadway,etc.